-
STMicroelectronics recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently.
-
Use a heat sink or thermal interface material to reduce the junction-to-case thermal resistance, and ensure good airflow around the device. Also, consider derating the device's current handling capability at high temperatures.
-
The maximum allowed voltage on the input pins is the supply voltage (VCC) + 0.3V, but it's recommended to keep it within the supply voltage to prevent latch-up.
-
Use ESD protection devices, such as TVS diodes, on the input lines, and follow proper handling and storage procedures to prevent ESD damage.
-
A 100nF to 1uF ceramic capacitor is recommended for bypassing the supply voltage, depending on the specific application and noise requirements.