The recommended PCB layout for optimal thermal performance involves using a large copper area for heat dissipation, keeping the component away from other heat sources, and using thermal vias to dissipate heat to the other side of the board.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and apply a small amount of solder paste to the pads. Avoid applying excessive force or pressure during soldering, and ensure the component is properly aligned with the PCB pads.
The maximum allowable voltage derating for the VT6045CBP-M3/4W is typically 10% to 15% below the maximum rated voltage, depending on the specific application and environmental conditions.
To handle ESD protection for the VT6045CBP-M3/4W, use ESD-sensitive handling procedures, such as wearing an ESD wrist strap or using an ESD mat, and ensure the component is stored in an ESD-protected environment.
The recommended storage condition for the VT6045CBP-M3/4W is in a dry, cool place with a temperature range of 5°C to 30°C and humidity below 60%.
VT6045CBP-M3/4W datasheet
by Vishay Semiconductors
Findchips
