Magnecraft recommends a minimum of 0.1 inches (2.54 mm) spacing between the relay module and other components on the PCB to ensure proper heat dissipation and to prevent electrical noise interference.
Yes, the W117SIP-18 is designed to withstand vibrations up to 10 G (10 m/s²) and can be used in high-vibration environments, but it's recommended to follow proper mounting and installation procedures to ensure reliable operation.
The W117SIP-18 can handle surge currents up to 100 A for 10 ms, but it's recommended to derate the relay's current handling capacity based on the specific application and environmental conditions.
The W117SIP-18 is rated for operation up to 85°C (185°F), but it's recommended to derate the relay's current handling capacity and consider additional cooling measures for high-temperature applications above 70°C (158°F).
Magnecraft recommends using a minimum of 24 AWG wire for the coil connections, and the wire length should be kept as short as possible (less than 10 inches or 254 mm) to minimize voltage drop and ensure reliable operation.
Findchips
