Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img uA9637ACP datasheet by Texas Instruments

    • DUAL DIFFERENTIAL LINE RECEIVER
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    uA9637ACP datasheet preview

    uA9637ACP Frequently Asked Questions (FAQs)

    • A good PCB layout for the UA9637ACP involves keeping the input and output traces short and symmetrical, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
    • To ensure proper biasing, connect the VCC pin to a stable voltage source, and decouple it with a 0.1uF capacitor to ground. The VBIAS pin should be connected to a voltage divider network that sets the desired output voltage. A 1kΩ to 10kΩ resistor is recommended for the voltage divider.
    • The maximum power dissipation of the UA9637ACP is 1.5W. However, it's recommended to keep the power dissipation below 1W to ensure reliable operation and to prevent overheating.
    • Yes, the UA9637ACP can be used in switching power supply designs, but it's essential to ensure that the device is properly bypassed and decoupled to prevent noise and oscillations. A snubber network may be required to reduce ringing and ensure stable operation.
    • To protect the UA9637ACP from overvoltage and overcurrent conditions, use a voltage regulator with overvoltage protection (OVP) and overcurrent protection (OCP) features. Additionally, consider adding a fuse or a polyfuse in series with the input voltage to prevent damage from excessive current.
    Supplyframe Tracking Pixel