SLTA Search Results

PT78

Abstract: PT78ST105
Contextual Info: Application Notes—AN8 SLTA008A PT78 & PT79 ISR Series Revised 6/30/2000 Using the PT78 Series Integrated Switching Regulator (ISR) The Integrated Switching Regulator (ISR) by Power Trends is a complete switch-mode power regulator capable of delivering regulated voltages at currents up to 1.5 Amps. The

zener diode 5.6v

Abstract: zener diode 9.1v zener diode specifications ZENER diode TESTING CIRCUIT 9.1v zener diode PT78 series 1N5339B 1N5340B 1N5346B 1N5347B
Contextual Info: Application Notes—AN9 PT78 & PT79 ISR Series SLTA009A Revised 6/30/2000 Suggested OVP Zener Diodes for PT79 Series ISRs The PT79SR100 requires an over-voltage protection (OVP) zener diode on the output to prevent turn-on overshoot. The table below lists the appropriate zener voltage and

AN22

Contextual Info: Application Notes—AN22 SLTA051 All Products Revised 9/18/2000 Reflow Soldering Requirements for Plug-in Power Surface Mount Products All Texas Instruments surface mount Plug-in Power Products are designed to be compatible with industry standard low temperature solder reflow processes and

AN11

Abstract: PT78
Contextual Info: Application Notes—AN11 SLTA011A PT78 & PT79 ISR Series Revised 6/30/2000 PT78/79 Series ISR Thermal Considerations The PT78/79 Series Integrated Switching Regulator (ISR) is protected from thermal overload by an internal over-temperature shutdown circuit. The ISR will operate at ambient

Contextual Info: HA.C /* * * * * * * * HA.C - Copyright c 1992 Echelon Corporation Last revision 5/10/92 Example LONWORKS host application. Uses a LONWORKS standard network driver to communicate with an Echelon Serial LONTALK Adapter (SLTA) or a Microprocessor Interface Program (MIP)-based network interface.

Contextual Info: Application Notes—AN7 SLTA007A PT5100/6100/6210/6300 Series Revised 6/30/2000 Thermal Considerations for PT Series ISRs Power Trends’ PT Series of Integrated Switching Regulators (ISRs) provide several configuration options for removing internally generated heat. To maximize the

SLTA-10

Abstract: 652bps EIA-232 EIA-232C NT 2955 ON LTS-20 Neuron Chip 3150 MIP application 15-82-1175 SLTA-10 Adapter
Contextual Info: LTS-20 Serial Adapter Core Module Model 65202 Description The LTS-20 Serial Adapter Core Module is a compact module used to build serial LonTalk adapters SLTAs that require an LNS Network Services Interface (NSI) or Microprocessor Interface Program (MIP)-compatible network

equivalent components of diode 1n4001

Abstract: 1N4001 1N5365B AN10 PT78
Contextual Info: Application Notes—AN10 SLTA010A PT78 & PT79 ISR Series Revised 6/30/2000 Vehicular Power Adapter Using ISRs The Power Trends’ Integrated Switching Regulators (ISRs) can be used in vehicular power adapter applications with the addition of one external component (excluding the

SLTA-10 Serial LonTalk Adapter

Abstract: MIP 282 SLTA-10 circuit Integer numerique cmd SLTA la 78040 d 78040 EIA-282 SLTA-10 Adapter EIA-232
Contextual Info: SLTA-10 Adapter and PSG/3 User’s Guide Revision 3 e ECHELON’ Corporation 078-0160-OlE Echelon, LON, LonTalk, LonBuilder, NodeBuilder, Neuron, LonManager, LONMARK, LonMaker, LONWORKS, 3120 and 3150 are registered trademarks of Echelon Corporation. LonSupport

SLTA051

Abstract: AN22
Contextual Info: Application Notes—AN22 SLTA051 SEPTEMBER 2000 All Products Reflow Soldering Requirements for Plug-in Power Surface Mount Products All Texas Instruments surface mount Plug-in Power Products are designed to be compatible with industry standard low temperature solder reflow processes and

Contextual Info: Application Report SLTA054 – May 2005 – Revised August 2009 High-Temperature Soldering Requirements for Plug-In Power Surface-Mount Products . PMP - Plug-In Power

078-0188-01B

Abstract: SLTA-10 Serial LonTalk Adapter SLTA SLTA-10 BAUD38400 PLC modem PLT-22 toshiba laptop service manual EIA-232 PCC-10
Contextual Info: @ECHELON Power Line SLTA Adapter and Power Line PSG/3 User’s Guide Revision 2 @ 078-0188-01B ® Echelon, LON, LonTalk, LonBuilder, NodeBuilder, Neuron, LonManager, LONMARK, LONWORKS, 3120, and 3150 are registered trademarks of Echelon Corporation. LonMaker and i.LON are trademarks of Echelon

ERIE ceramic capacitor

Abstract: 78SR AN13 PT6500 MURATA ERIE CAPACITOR
Contextual Info: Application Notes—AN13 SLTA013A All Products Revised 6/30/2000 ISR Input/Output Filters Input/Output Capacitors The easiest way to reduce output ripple/noise is to add one or more 1µF ceramic capacitors, such as C4 shown in Figure 17. They should be placed as close as possible to the

CAPACITOR mtbf

Abstract: inductor mtbf MIL-STD-217F Capacitor Assembly MTBF PT78 series Stanyl circuit board mtbf MIL-STD217F AN12 PT78
Contextual Info: Application Notes—AN12 SLTA012A PT78 & PT79 ISR Series Revised 6/30/2000 General Reliability Power Trends’ PT78/79 Series (ISRs) are designed for long reliable operation by using conservative derating factors and integral over-current and over-temperature protection.

PT5000

Abstract: AN14 PT6000 PT6100 PT78 PT78ST105
Contextual Info: Application Notes—AN14 SLTA014A All Products Revised 6/30/2000 ISR Qualification Process Introduction All new Power Trends ISRs (Integrated Switching Regulators) go through a rigorous qualification process before they are introduced into production. The

LIMITING INRUSH CURRENT mosfet

Abstract: 1N4148 1N5240B AN21 J177 LMC7211 PT3320 PT3323 uses of magnitude comparator
Contextual Info: Application Notes—AN21 SLTA021A Isolated Products Revised 6/30/2000 “Hot Plug-in” In-rush Current Limiting Circuits for Power Trends’ DC-DC Converters zener diode (VR1) gives U1 a supply voltage of 10V. The turn-on rate of Q2 is controlled by the capacitor C2.

K1198

Abstract: K1049 PT4205 PT4201 k2150 K2175 K2952 k241 k1056 k2412
Contextual Info: Application Notes—AN20 SLTA020A Isolated Products Revised 6/30/2000 Using the PT4200/4205/4300 DC to DC Converter Remote Control (RC) Turn-on or turn-off can be realized by using the RC pin. Normal operation is achieved if pin 11 is open. If pin 11 is connected to pin 17 (PT4200/4300) or

Contextual Info: Application Notes—AN7 SLTA007A PT5100/6100/6210/6300 Series Revised 6/30/2000 Thermal Considerations for PT Series ISRs Power Trends’ PT Series of Integrated Switching Regulators (ISRs) provide several configuration options for removing internally generated heat. To maximize the

constant current load using lm324

Abstract: LM358 internal circuit functions light sensor in lm324 lm358 current monitor LM358 PT6300 Series LM324 PT6100 PT6103 PT6210
Contextual Info: Application Notes—AN6 SLTA006A PT6100/6210/6300 Revised 6/30/2000 Using the PT6100/6210/6300 as a Constant Current Source Overview Theory of Operation The Power Trends PT6100/6210/6300 Series Integrated Switching Regulator (ISR) is a self-contained device that was

SLTA055

Abstract: PTH12020 PTH12050 PTH12060 capacitor selection
Contextual Info: Application Report SLTA055 – FEBRUARY 2006 Input and Output Capacitor Selection Jason Arrigo. PMP Plug-In Power ABSTRACT When designing with switching regulators, application requirements determine how

PT6500

Abstract: PT6501 PT6502 PT6503 PT6504 PT6505 PT6506 PT6520 PT6521 PT6522
Contextual Info: Application Notes PT6500/PT6520 SLTA 053 January 2004 Using The PT6520 Series To Replace PT6500 Series Parts In Existing Designs The use of insulating tape, such as 0.0028-in thick polyimide film, may be an option to protect signal traces. Electrical Characteristics

PLT modem

Abstract: PLT-22 power line communication SLTA EIA-232
Contextual Info: PL-SLTA Serial Network Adapter Model 76000 Description The PL-SLTA Power Line Serial Network Adapter is a high-performance LONWORKS interface for use with residential gateways, laptop, desktop, or embedded computers equipped with an EIA-232 serial interface and compatible

ERIE murata ceramic

Abstract: ERIE CAPACITORS ERIE ceramic capacitor 78SR AN13 PT6500 SLTA013A
Contextual Info: Application Notes—AN13 SLTA013A Revised 6/30/2000 All Products ISR Input/Output Filters Input/Output Capacitors The easiest way to reduce output ripple/noise is to add one or more 1µF ceramic capacitors, such as C4 shown in Figure 17. They should be placed as close as possible to the

equivalent components of diode 1n4001

Abstract: diode 1N4001 EQUIVALENT COMPONENT equivalent component DIODE 1N4001 1N4001 zener diode 100MF 1N4001 1N5365B AN10 PT78
Contextual Info: Application Notes—AN10 SLTA010A PT78 & PT79 ISR Series Revised 8/23/2000 Vehicular Power Adapter Using ISRs The Power Trends’ Integrated Switching Regulators (ISRs) can be used in vehicular power adapter applications with the addition of one external component (excluding the